Product Information

LOW RANGE TURBIDITY SENSOR

The low-range turbidity sensor guides the parallel light emitted by the light source downwards

nto the water sample in the sensor. The light is scattered by the suspended particles in the water

sample, and the scattered light at 90 degrees to the incident angle is received by the silicon

photovoltaic cell receiver immersed in the water sample. By calculating the relationship between

the 90-degree scattered light and the incident beam, the turbidity value of the water sample

is obtained.

It is widely used in the online monitoring of turbidity in front of and after the filter, finished

water in the water plant, direct drinking water system, and the online monitoring of turbidity

in various industrial production circulating cooling water, filtered water, and reclaimed water

reuse and other links.

FEATURES

● A continuous reading scattering turbidimeter, specifically designed for low-range turbidity detection

● Data is stable and has good reproducibility

● Simple to clean and maintain

● Modbus RTU digital communication, anti-interference, and easy to configure

TECHNICAL PARAMETERS

Range:0.001-100 NTU

Display accuracy:±2% or ±0.015 NTU of the reading,Take the larger value, @ 0.001-40 NTU; ±5% of the degree @40-100 NTU

Resolution:0.01-0.1NTU depending on the different ranges

Repeatability: ±2% F.S

Flow rate:300ml/min≤X≤700ml/min

Operating temperature: 0-45C (no condensation)

Dimensions:310mm210mm410mm (length * width * height)

Main materials: Body:ABS +SUS316L Seal: Butadiene acrylonitrile rubber Cable:PVC

Waterproof grade: IP66/NEMA4

Power supply voltage: Wide voltage range 9-36VDC,recommended 12VDC

Power consumption: 3.5W for low-power LED version sensors, 15W for tungsten lamp

version sensors

Cable length: 3m standard cable, which can be extended.